네트워크 속도 체크하기 (iperf)
속도 체크 대상 서버와 클라이언트에 iperf 를 설치 합니다.
[root@sysdocu ~]# apt -y install iperf
서버에서
[root@sysdocu ~]# iperf -s
클라이언트에서
[root@sysdocu ~]# iperf -c 192.168.0.10 -i 1 -t 10
[10G 속도 정상일 경우]
[root@sysdocu ~]# iperf -c 192.168.0.10 -i 1 -t 10
------------------------------------------------------------
Client connecting to 192.168.0.10, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.0.12 port 38508 connected with 192.168.0.10 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 1.09 GBytes 9.34 Gbits/sec
[ 3] 1.0- 2.0 sec 1.08 GBytes 9.31 Gbits/sec
[ 3] 2.0- 3.0 sec 1.09 GBytes 9.39 Gbits/sec
[ 3] 3.0- 4.0 sec 1.08 GBytes 9.29 Gbits/sec
[ 3] 4.0- 5.0 sec 1.09 GBytes 9.38 Gbits/sec
[ 3] 5.0- 6.0 sec 1.09 GBytes 9.33 Gbits/sec
[ 3] 6.0- 7.0 sec 1.05 GBytes 9.06 Gbits/sec
[ 3] 7.0- 8.0 sec 1.08 GBytes 9.31 Gbits/sec
[ 3] 8.0- 9.0 sec 1.07 GBytes 9.16 Gbits/sec
[ 3] 0.0-10.0 sec 10.8 GBytes 9.29 Gbits/sec
[10G 속도 비정상일 경우]
[root@sysdocu ~]# iperf -c 192.168.0.10 -i 1 -t 10
------------------------------------------------------------
Client connecting to 192.168.0.10, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.0.12 port 49416 connected with 192.168.0.10 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 256 KBytes 2.10 Mbits/sec
[ 3] 1.0- 2.0 sec 128 KBytes 1.05 Mbits/sec
[ 3] 2.0- 3.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 3.0- 4.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 4.0- 5.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 5.0- 6.0 sec 128 KBytes 1.05 Mbits/sec
[ 3] 6.0- 7.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 7.0- 8.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 8.0- 9.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 9.0-10.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 10.0-11.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 11.0-12.0 sec 0.00 Bytes 0.00 bits/sec
[ 3] 0.0-13.7 sec 640 KBytes 381 Kbits/sec
'리눅스 > Network' 카테고리의 다른 글
CentOS 7 에서 본딩 (bonding) 구성 (0) | 2019.02.01 |
---|---|
Ubuntu 16.04 에서 STUN/TURN 서버 설치 (0) | 2018.10.04 |
iptables 룰 추가 운선순위값 입력하여 적용시키기 (0) | 2017.09.28 |
네트워크 장치명 변경 (Ubuntu 16.04) (0) | 2017.08.08 |
Ubuntu 16.04 IPTABLES 사용법 (0) | 2017.02.14 |